Impulsa tu creatividad y tu producción!
Precio unitario
COP 191.830
/set
Descuentos por volumen
Cantidad
Descuento
Precio por unidad
1
0%
COP 191.830
2
3%
COP 186.075
3
6%
COP 180.320
4+
10%
COP 172.647
Costo total
COP 191.830
Cantidad
/set
1
Letradora Manual de Lujo, Tipo A+U, Acrilico
Descripcion:
Material: Acrilico, Plastico, PVC, Plexiglas
Letradora Manual de Lujo, Tipo U, Acrilico, es ideal para fabricar letras o señales de acrilico.
Apto para doblar acrilico de 1.5mm-4mm (0.06" x 0.16") grueso
• Adoptando elementos de calentado PTC ;
• Placa conductora de calor de aleacion termal se calienta uniformemente;
• Adopta plasticol de alta calidad resistentes al calor, no se pega el acrilico;
• Facil de operar y durable.
• Los elementos de calentamiento PTC tienen caracteristicas como, rapido calentamiento, durable, control automatico de temperatura.
• Placa conductora de aleacion de aluminio se ajusta al angulo entre la placa y el acrilico.
• Dobla angulos rectos.
• Dobla esquinas redondas.
• Facil de operar, ahorra tiempo.
• Garantia: 2 años.
 |
 |
| Heating plate of our Acrylic Bender | Heating plate of COPYCAT Acrylic Bender |
 |
 |
| Temperature Control PCB part of our Acrylic Bender | Temperature Control PCB part of COPYCAT Acrylic Bender |
 |
 |
| Power Switch part of our Acrylic Bender | Power Switch part of COPYCAT Acrylic Bender |
 |
 |
| Power Plug of our Acrylic Bender | Power Plug of COPYCAT Acrylic Bender |
| PERFORMANCE COMPARISON | |
 |
 |
| Our Acrylic Bender | COPYCAT Acrylic Bender |
 |
 |
As the copycat cannot hold the acrylic sheet seamlessly so that will need your finger to help to bend it like below picture, so they have to put insulation film or their acrylic bender cannot hold and bend acrylic bender fully. |
|
 |
 |
| Our Acrylic Bender | COPYCAT Acrylic Bender |
| About Vertical guide in copycat products, as we design acrylic bender its head are all flat, so it will have an vertical angle against desk when operator use it, so this vertical guide is totally useless. Our Acrylic bender head are all designed to be flat, that will have vertical angle when operator use it against desk | |
 |
 |
