¡Feliz Año Nuevo Chino!
Nuestra oficina estará cerrada del 1 al 8 de febrero y reabrirá el 9 de febrero.
30/45/60 Degree Pcut Vinyl Cutter Blades for Vinyl Film, 3pcs/pack
60 Degree
Precio unitario
COP 61.385
/pack
Descuentos por volumen
Cantidad
Descuento
Precio por unidad
1
0%
COP 61.385
Opciones
Por Favor Eliga el Tipo Por Favor Eliga el Tipo
Costo total
COP 61.385
Cantidad
/pack
1
30/45/60 Degree Pcut Vinyl Cutter Blades for Vinyl Film, 5pcs/pack
Feature:
• Diameter 1.45mm.
• Knifepoint is made from ultrafine grain size Zhuzhou cemented carbide;
• Higher hardness, greater strength, good abrasion resistance and good durability;
• 30°,45°and 60°are in different color;
• Good sharpness, will not damage your material;
• The cutting speed is extremely quick with extra long life;
• Domestic topmost hose configuration better protects knifepoint from damage.
Used for:
It can be used for vinyl cutter, electronic film cutter proofer, roll to roll cutting machine.
Note:
• If you use different cutters or different papers, you should adjust the extended length of the knife point. When finish adjustment,you can test the effect.
• Do not extend the knife point too long, otherwise you will pierce through the backing sheet thereby shorten the service life of cutter blades and mound layer.
• When cutting ordinary post-its, the extended length of the knife point should be within 0.55 mm.
The major difference for blades of different angles is cutting depth.
• 30° (Yellow) is great for small and fine designs, and is generally used for cutting quite small words, its knife point is rather sharp;
• 45°(Red) is commonly used in general designs, self-adhesive sticker, PVC, reflective film and post-its, which is very practical.
• 60°(Blue) is great for large designs, reflective film and other material.
Application:
Commonly used in cutting reflective film, CAD diagram, 3M reflective film, mobile phones beauty paste, etc.
